About product
700 Watts peak (350 Watts continuous) Class D power
The 90 H x 60 V horn delivers greater coverage
The full grille delivers style and provides protection for your investment.
15-inch (381 mm) LF driver, 2-inch (51 mm) voice coil
1-inch (25.4 mm) titanium HF compression driver
Lightweight, portable design for main or wedge monitor operation
Standard speaker pole socket
Bi-amplified design with precision active crossover and EQ
Balanced XLR Mic/Line input, Link Output and Volume control
Integrated analog limiter and overload protection circuitry
Contour switch with low- and high-frequency +3dB boost
Ground-lift switch removes unwanted hum or buzz
Designed and tuned in the USA
System Type: 2-way active ported loudspeaker
Drivers:
Low-Frequency: 15.0” (381 mm) driver, 2.0” (51 mm) voice coil
High-Frequency: 1.0” (25 mm) titanium-diaphragm compression driver, 1.0” (25 mm) voice coil
Amplifier: 700 watts (peak), 350 (continuous), Class D power
Horn Coverage: 90º horizontal x 60º vertical (nominal)
Frequency Response: 65 Hz – 20 kHz (-3 dB)
Crossover Frequency: 2.2 kHz
Max SPL: 121 dB @ 1 m
Equalization: Contour switch with low- and high-frequency +3 dB boost
Connectors:
(1) XLR/TRS 1/4” (6.35 mm) balanced input (Line/Mic)
(1) XLR output (Link)
(1) IEC power cable input
Controls: Power switch, volume control knob, contour switch, ground-lift switch
Indicators: (2) power LEDs (1 front panel, 1 rear panel), clip limiter LED
Power:
Connection: IEC
Voltage: 100–120 V~, or 220–240 V~; 50/60 Hz
Fuse: 100–120V T6.3AL AC250V or 220–240V T3.15AL AC250V
Consumption: 350 W
Protection: Thermal, overload analog limiter/compressor
Enclosure: Injection-molded polypropylene, multi-angle for main or monitor applications, metal grille, rubber feet, 2 handles (both sides)
Mounting/Installation: Standard 36 mm pole socket, wedge monitor
Dimensions (height x width x depth):
24.9” x 15.2” x 14.6”
634 x 386 x 371 mm
Weight:
31.7 lb
14.4 kg
Write comment 0 Write comment
0